IP Address Selection
On products with Ethernet communication, a 16 position rotary switch is included for the setting the IP address per the table below. The ST Configurator software can be used to alter the switch settings, which is useful is a different range of IP addresses is needed.
You must cycle power for the new IP address to take effect.
| Switch Setting | IP Address |
| 0 | 10.10.10.10 |
| 1 | 192.168.1.10 |
| 2 | 192.168.1.20 |
| 3 | 192.168.1.30 |
| 4 | 192.168.0.40 |
| 5 | 192.168.0.50 |
| 6 | 192.168.0.60 |
| 7 | 192.168.0.70 |
| 8 | 192.168.0.80 |
| 9 | 192.168.0.90 |
| A | 192.168.0.100 |
| B | 192.168.0.110 |
| C | 192.168.0.120 |
| D | 192.168.0.130 |
| E | 192.168.0.140 |
| F | DHCP |